gaming, how to, windows, microsoft

Emulating the PS3 on a PC is not an easy task due to its complicated architecture. Thanks to RPCS3, now you can easily play PS3 games on your PC. Let’s take a look at how you can play PS3 games on your PC with RPCS3.

Content

  • System Requirements
  • Download and Install RPCS3
  • Setting Up RPCS3
  • Download the PlayStation 3 Firmware
  • Boot a PS3 Game
  • How to Get PS3 Games
  • Game Compatibility
  • Configure the Controls
  • Additional Configurations
  • Upgrade Games With Patches
  • Frequently Asked Questions

System Requirements

Before we start, you’ll need to make sure your PC is up to the task.

gaming, how to, windows, microsoft

Image source: Pexels

For the best experience, users should run RPCS3 within the recommended requirements mentioned below, as the RPCS3 development team has gone on record stating that they cannot guarantee the performance of system specifications below the recommended requirements.

  • Windows: Windows 7 SP1, Windows 8.1, Windows 10, Windows 11
  • Linux: Linux 5.4 (Older LTS), Ubuntu 18.04 or newer
  • macOS: macOS Big Sur 11.6 or newer
  • FreeBSD: FreeBSD 12.3 or newer

CPU

  • AMD – Any x64 CPU (Recommended: six cores and 12 threads, eight cores or more. Zen 2 architecture or newer, Threadripper 1000 and 2000 series are not recommended)
  • Intel – Any x64 CPU (Recommended: six cores and 12 threads, eight cores or more. Intel Skylake architecture or newer)

Note: CPUs without AVX2 and with less than four cores and eight threads are expected to run poorly. CPUs with only two cores per CCX cluster are expected to run badly overall.

GPU

  • AMD – OpenGL 4.3 compatible or newer (Recommended: Vulkan compatible with active driver support)
  • AMD Evergreen architecture, HD 5000 series or newer (Recommended: AMD Polaris architecture, RX 400 series or newer)
  • NVIDIA – OpenGL 4.3 compatible or newer (Recommended: Vulkan compatible with active driver support)
  • NVIDIA Fermi architecture, GTX 400 series or newer (Recommended: NVIDIA Maxwell architecture, GTX 900 series or newer)

RAM

  • 4 GB of RAM or more (Recommended: 8 GB of dual-channel RAM or more)

Storage

  • SSD or HDD storage for emulator data and games
  • 512 MB for base emulator data, 5 GB for virtual console dev_hdd1 cache
  • 128 MB for emulator cache and console user data per installed game

Download and Install RPCS3

Visit RPCS3’s official site and download the emulator to your hard disk drive. RPCS3 is available for Windows, macOS, Linux and FreeBSD. This guide shows you how to set up RPCS3 in Windows, but the process is more or less the same for all supported operating systems.

gaming, how to, windows, microsoft

The Windows version is available as a ZIP archive. Extract the downloaded archive. RPCS3 doesn’t need installation, so you can run it directly by double-clicking on the rpcs3.exe file.

gaming, how to, windows, microsoft

Setting Up RPCS3

Run the emulator, and if you wish, as it suggests in the pop-up window that appears, check out its Quickstart guide at the official site to learn how to use it.

gaming, how to, windows, microsoft

RPCS3 periodically exchanges information with its official site, like updated compatibility data for the games it supports. If you are behind a firewall, you should grant access to RPCS3 to allow it to update its data without having to do it yourself manually.

gaming, how to, windows, microsoft

RPCS3 emulates the PlayStation 3’s hardware but not its software. For that part of the equation, you will have to download the original firmware that you would use on an actual console to update it.

Download the PlayStation 3 Firmware

To get your hands on the official PlayStation 3 firmware, visit the official PlayStation site. The PlayStation site offers firmware for the whole family of consoles in the PlayStation family that are still supported. To find the firmware for the PlayStation 3, you’ll have to do a little digging.

gaming, how to, windows, microsoft

  1. Once you point your browser to the PlayStation homepage, click on “Support,” then select “Support” from the drop-down menu that appears.

gaming, how to, windows, microsoft

  1. On the following page, click the button labelled “Hardware & Repairs.”

gaming, how to, windows, microsoft

  1. Click on the “PlayStation 3” button.

gaming, how to, windows, microsoft

  1. Click on “System software update -> PS3 System update.”

gaming, how to, windows, microsoft

  1. Right-click the “Download PS3 Update” button and select “Save As.”
  2. A dialog box will open for you to choose where the PS3 system update file will be downloaded to your computer.

gaming, how to, windows, microsoft

  1. At the time of this writing, the most current PlayStation 3 firmware is Update 4.89. Once the file has completed downloading, return to the RPCS3 emulator.
  2. With RPCS3 launched, click on “File” in the menu bar at the top and select “Install Firmware.”

gaming, how to, windows, microsoft

  1. Point RPCS3 to the PlayStation 3 firmware file you downloaded from the Sony PlayStation site.
  2. Sit back and let RPCS3 do its thing. During this time, RPCS3 will install the necessary files, so just be patient.

gaming, how to, windows, microsoft

  1. RPCS3 will inform you when the process completes successfully.

gaming, how to, windows, microsoft

  1. You’ll have to wait a bit more while RPCS3 pre-compiles modules which will help your games load faster.

gaming, how to, windows, microsoft

Boot a PS3 Game

RPCS3 supports both digitally-downloaded games in PKG files and disc-based games in either ISO or uncompressed-folder format.

Note: downloading games you don’t own is considered illegal in most countries. Make Tech Easier does not condone piracy.

  1. Install the game by selecting “File -> install.pkg.” Soon after, it will appear in RPCS3’s game list, and you can launch it with a double-click.

gaming, how to, windows, microsoft

  1. You can boot disc-based games directly by selecting “Boot Game,” then choosing its ISO or folder. Disc-based games may also need installation, but unlike PKG games, it’s done through the emulated PlayStation 3’s interface.

gaming, how to, windows, microsoft

  1. When booting a game for the first time, RPCS3 will compile more files it needs to run. Admittedly, this process can be annoying. Thankfully, it only has to be done once per game.

gaming, how to, windows, microsoft

How to Get PS3 Games

The easiest and arguably the only legal way to get your hands on PlayStation 3 games to run within RPCS3 is to dump PS3 games you own. This is fairly straightforward; however, there are some specific software and hardware requirements you must fulfill before you can proceed.

Dumping a PS3 Game With a PS3 Console

Using a PlayStation 3 console to dump your games is considered the best way to dump disc-based games and the only way to dump digitally-downloaded games. However, your PlayStation 3 console will need to run custom firmware.

gaming, how to, windows, microsoft

Image source: Unsplash

To dump disc-based games, you’ll need to use multiMAN homebrew software, then transfer those files over to a PC via an external drive or FTP connection between your PlayStation 3 and your computer. However, as mentioned earlier, you will need to mod your PlayStation 3 console to run custom firmware. Be aware that if you decide to go down this route, modding your PS3 will violate the user terms outlined by Sony.

Dumping a PS3 Game with a PC

You can also dump PlayStation 3 discs using a Blu-ray drive, but not all Blu-ray drives will recognize a PS3 disc because of the way PS3 format discs are designed. Therefore, you need to have a Blu-ray drive that has a Mediatek chipset and a +6 read offset. Thankfully, the RPCS3 website has a list of compatible Blu-ray drives that are capable of reading PlayStation 3 format discs.

gaming, how to, windows, microsoft

Once you have a compatible Blu-ray drive, you can execute a PS3 disc dump in a few different ways. A piece of software called Disc Dumper is the easiest way to decrypt your PS3 game disc, as it automates the process.

However, you can also use the Linux command line, provided you’re comfortable with that. Alternatively, if those options won’t work for you, there is a way to manually dump your discs that is more labor intensive. You can find more detailed instructions in the RPCS3 Quickstart Guide.

Game Compatibility

Full disclosure: not every single PS3 game will work without a hitch with RPCS3. While the development of the emulator is impressive and ongoing, full compatibility is a tall order. Fortunately, there are many games, both disc-based and digital, that are fully playable within RPCS3. Thankfully, the official RPCS3 website is home to a comprehensive list of compatible PS3 software.

gaming, how to, windows, microsoft

Currently, the list features 3,276 games and apps, with about 68% of them being playable. According to the RPCS3 team, “playable” is defined as a game that can be completed with “playable performance and no game breaking glitches”. It should also be mentioned that the list is changing frequently, so be sure to check it often if your favorite game isn’t yet playable.

Configure the Controls

Now that you’re ready to play a game, you will need to configure the controls.

  1. Click on “Pads” in the menu bar at the top of the RPCS3 screen. RPCS3 supports keyboard input, but considering virtually all PlayStation 3 software was designed for a controller, you’ll want to use one for the best experience.

gaming, how to, windows, microsoft

Image source: Wikipedia

  1. Thankfully, you can use an actual PlayStation controller connected to your PC by choosing “DualShock 3” or “DualShock 4” from the “Handlers” pull-down menu on the top left.
  2. Xbox and other “XInput” controllers are also supported by choosing the appropriate option from the same spot.

gaming, how to, windows, microsoft

Image source: Pexels

  1. With your controller selected, check out whether it’s detected by moving the two thumbsticks while watching their input live in the two circles at the bottom right of the window. Most joypads today have the same button configuration established by the first PlayStation’s DualShock joypad, so you probably won’t have to remap anything.

gaming, how to, windows, microsoft

Additional Configurations

gaming, how to, windows, microsoft

You may meet a second problem: each game may need some tweaks in the emulator’s settings. Some don’t run well (yet), and others are fully incompatible. In our case, Demon’s Souls was displaying its graphics as shadows.

gaming, how to, windows, microsoft

There are two ways to configure the emulator: by clicking on “Config” or using the entries in the “Configuration” menu, you set up its options globally for all games. Alternatively, you can use per-game configurations by right-clicking on an entry in the game list and choosing “Create Custom Configuration” from the menu that pops up.

gaming, how to, windows, microsoft

You won’t have to try all available options to see if the game works. Instead, pay a visit to the RPCS3 Wiki and search for your game to find the optimal settings.

gaming, how to, windows, microsoft

  1. Create a custom configuration for your selected game and tweak the emulator’s settings as suggested in RPCS3 Wiki’s game entry, then click “Save.”

gaming, how to, windows, microsoft

  1. Try rerunning your game, and if it’s compatible, in seconds you’ll start playing as if you were gaming on an actual PS3.

gaming, how to, windows, microsoft

Anti-Aliasing

Today’s PCs are much more powerful than the PS3, so for compatible games, you can also enable “Anisotropic Filtering” and “Anti-Aliasing” in RPCS3’s GPU settings for smooth game graphics with increased detail. Even better, you can increase the “Resolution Scale” to a number close to your monitor’s resolution to have RPCS3 upscale the emulated game’s graphics.

Note, though, that some games may “break” when the emulator’s settings don’t closely match the capabilities of PlayStation 3’s hardware.

gaming, how to, windows, microsoft

Upgrade Games With Patches

Newer versions of RPCS3 allow you to easily download patches for games through the emulator itself. Those patches may tweak its code to increase compatibility with some games and modernize others to take advantage of our PCs’ increased horsepower. Some fix annoyances, such as removing long and unskippable intro videos.

  1. Visit RPCS3’s patch management window from “Manage -> Game Patches.”

gaming, how to, windows, microsoft

  1. Initially, RPCS3’s patch list will be empty. Click on the “Download latest patches” button on the bottom left of the Patch Manager window that appears.

gaming, how to, windows, microsoft

  1. RPCS3 will download all available patches and, after its list is populated with them, will inform you that your patch file is up to date.

gaming, how to, windows, microsoft

  1. You can enable “Only show owned games” on the top center of the window to filter the list to show only the games you have. Alternatively, you can locate a specific title you’re interested in by typing its name in the “Filter patches” field on the top left of the window.

gaming, how to, windows, microsoft

  1. When you find the patches for a game you want (that is, if any patches exist for it), you can expand its title and enable them by ticking the checkbox on their left.

gaming, how to, windows, microsoft

  1. You can enable multiple patches for multiple games and won’t have to repeat the process in the future. They’ll remain active until you disable them. Thanks to those patches, you can play some of the supported games even better than on an actual PlayStation 3.

gaming, how to, windows, microsoft

Demon’s Souls feels much smoother and responsive on the PC with its “Unlock FPS” patch than it ever did on the PlayStation 3 locked at 30FPS.

RPCS3 has passed the phase of trying to emulate most of the actual hardware, and now its team is squashing bugs, increasing its compatibility, and optimizing its performance, with new releases almost every month. Therefore, even if a game doesn’t work today, it’s worth trying it out again when newer versions of RPCS3 are released.

Frequently Asked Questions

Is the RPCS3 Emulator Legal?

The legality of emulators can vary from country to country; however, the general consensus is that an emulator is not illegal. After all, an emulator is simply a piece of software that mimics the functionality of existing hardware. The same cannot be said about the games. In the United States, making a digital copy of a game you own is thought to fall under “fair use,” but the distribution, copying or downloading of a game is definitely illegal.

Can I just insert a PS3 game disc into my PC and start playing?

Currently, the RPCS3 emulator does not support reading PlayStation 3 game data directly from the disc. PS3 game discs are formatted in a such a way that the majority of disc drives on the market cannot read them. Therefore, you need either a PS3 console or a Blu-ray drive that is capable of reading the disc. Since most PC’s do not have a Blu-ray drive that can read PS3 game discs, it is necessary to dump the PS3 game data first, then run that digital copy of the game with the RPCS3 emulator.

Can I play multiplayer with other RPCS3 users or with others on real PS3 consoles?

Multiplayer support is something the RPCS3 team is actively considering, but the current focus is on making the emulator as accurate as possible. Playing games online with real PS3 consoles would require RPCS3 users to log in to the PlayStation Network. While theoretically this is possible, private PSN servers would need to be utilized.

Image Credit: Unsplash Screenshots by Ryan Lynch and Odysseas Kourafalos

TECH NEWS RELATED

How to Make Money in Two Point Campus

Short on money and needing to increase your bank balance in Two Point Campus? Here’s everything you need to know about making money. There are two core ways that you make money in Two Point Campus. The first is through tuition fees. Every student who studies at your campus will pay ...

View more: How to Make Money in Two Point Campus

OnePlus Ace Pro with Snapdragon 8+ Gen 1 SoC, 150W Fast Charging Launched: Price, Specifications

The OnePlus Ace Pro is the second device in the Ace series.

View more: OnePlus Ace Pro with Snapdragon 8+ Gen 1 SoC, 150W Fast Charging Launched: Price, Specifications

BGMI Ban: Gaming Firms Request PM Modi for ‘Uniform and Fair Treatment’ of All Entities Operating in South Asian Market

The ban on BGMI has affected not just gamers who can no longer enjoy their favourite shooter, but also several companies operating in India and the South Asian region at large. A new letter, signed by a group of game companies in India, urges the Prime Minister of India ...

View more: BGMI Ban: Gaming Firms Request PM Modi for ‘Uniform and Fair Treatment’ of All Entities Operating in South Asian Market

Best websites to download old PC games free

PC gaming on Windows 11/10 is very important to Microsoft, and that’s because the Windows operating system has long been the best place to play. Now, gaming is not just about getting involved with modern titles, but older ones as well. Millions of people around the world enjoy playing older ...

View more: Best websites to download old PC games free

How to See the First Amazon Purchase You Ever Made

Amazon.com has been around since 1995, which gives people plenty of time to build a long history with the site. It’s especially fun to look back at first Amazon order you ever placed, since Amazon keeps records going back to the beginning. Here’s how to find it. How to ...

View more: How to See the First Amazon Purchase You Ever Made

How to Change Name in Fall Guys

Any gamer has that one nickname they want to change. However, Fall Guys does not have a way to change usernames in-game. Even though players play Fall Guys on many platforms including Steam, PS4/5, and Xbox, they will only be able to change their names through Epic. Attempting to ...

View more: How to Change Name in Fall Guys

Street Fighter 6: Kimberly and Juri Revealed in New Trailer

Capcom has announced two new additions to the Street Fighter 6 roster. Revealed on-stage at EVO 2022, and later posted to Twitter, the trailer shows off Kimberly and Juri. Juri first appeared in Super Street Fighter IV, and is described as a sadistic thrill-seeker. The spunky ninja Kimberly is ...

View more: Street Fighter 6: Kimberly and Juri Revealed in New Trailer

Mahindra Scorpio-N Vs MG Hector Price, Engine Specs, Dimensions Comparison

Mahindra Scorpio-N Vs MG Hector Price, Engine Specs, Dimensions Comparison In this Mahindra Scorpio-N vs MG Hector comparison, we’ll look at the variant-wise prices, engine specs and dimensions to help you decide which car you should buy. Mahindra Scorpio-N Vs MG Hector Price Comparison Let’s first look at the prices ...

View more: Mahindra Scorpio-N Vs MG Hector Price, Engine Specs, Dimensions Comparison

Nismo Festival will be held this December at Fuji Speedway

Samsung is offering NFTs to customers who pre-order a Galaxy Z Fold 4 or Z Flip 4

Apple Pay is now in Malaysia, revealing merchants that support the payment option

How to Hide Your WhatsApp 'Last Seen' Status From Specific Contacts

Data router hijacking: why would Russia redirect Apple’s traffic?

How to Change or Remove User Account Image in Windows 11

Review ZR 01 Zen Running shoes

SUV Comparison: 2022 Hyundai Tucson Hybrid vs 2023 Kia Sportage Hybrid

How to Improve Average Assessment Score in Two Point Campus

How to Join Friends in Ready or Not

WhatsApp to Get Instagram-Like Reactions to Status With Emojis: What This Means

Marvel’s Spider-Man Leaked Screenshots Show the Game Running on PC

OTHER TECH NEWS

Top Car News Car News