For the third time in four months, SpaceX has rolled the first potentially flightworthy Super Heavy booster towards Starbase’s orbital launch mount.

Combined with a large crane – fitted with a jig solely used to lift boosters – moving to a spot just beside the booster, it’s clear that SpaceX is preparing to reinstall Super Heavy Booster 4 (B4) on the orbital launch mount. In the context of its unusual history, though, what happens next to the first more or less finished prototype of the largest rocket booster ever built is less clear.

Booster 4 is being hooked up to the SpaceX LR11000 crane. https://t.co/APLl78W8fn pic.twitter.com/FEbareRe72

— Chris Bergin – NSF (@NASASpaceflight) December 13, 2021

After a shockingly quick assembly over the course of six summer weeks, Super Heavy Booster 4 rolled out of Starbase’s ‘high bay’ facility and headed to the nearby orbital launch complex, where it was installed on a custom ‘mount’ designed to support booster testing and orbital launches. It’s now clear that during that early August photo opportunity and fit test, Booster 4 was nowhere close to finished. Nor, apparently, was it anywhere close to complete one month later when it returned to the orbital pad for the second time after another few weeks of work back at the high bay.

spacex rolls super heavy booster to orbital launch mount

August 6th. (SpaceX)

spacex rolls super heavy booster to orbital launch mount

September 7th. (Starship Gazer)

Three months (almost 14 weeks or 100 days) after the Super Heavy prototype’s second trip to the pad, SpaceX has yet to attempt to put the booster through a single proof test. There also appears to be a significant amount of work left to finish installing external ‘aerocovers’ and a heat shield meant to enclose all 29 of its Raptor engines. In the three-year history of Starbase, there isn’t a single prototype of the roughly two-dozen SpaceX has built, tested, and even flown that’s spent even half as long as Super Heavy B4 between apparent structural completion and its first test. Perhaps the fact that Booster 4 is a first-of-its-kind pathfinder explains SpaceX’s uncharacteristic sluggishness or reluctance to actually test the rocket.

In every other instance, SpaceX’s approach to Starship development has been to move incredibly quickly, build a large number of prototypes, and rapidly test those prototypes – often resulting in catastrophic failures. Data is gathered from those failures (SN1, SN3, SN4, SN8, SN9, SN10, SN11, and half a dozen smaller test tanks serve as examples), changes are made, and then the new and improved prototypes that follow repeat the process until SpaceX arrives at a successful design.

Super frosty LOX sub coolers and the recently moved Booster 4:6:36 pm 12/12/21 pic.twitter.com/k4fe9UwmqZ

— Starship Gazer (@StarshipGazer) December 13, 2021

Super Heavy B4’s circuitous path has been almost nothing like those of its predecessors. That could also be partly explained by the unavailability of a stand or facilities capable of truly proof testing a Super Heavy, which necessitates a supply of around 3200 tons (7M lb) of liquid nitrogen (LN2; for a cryogenic proof test with full tanks), another 3200 tons of a combination of liquid methane (LCH4) and oxygen (LOx), and the ability to ignite – and survive – as many as 29 to 33 Raptor engines. The suborbital stands SpaceX has used to proof Starships and even Super Heavy Booster 3 don’t even have half the storage capacity required to fully test a booster and the mounts and their surroundings would likely be catastrophically damaged or destroyed by the thrust and blast created by dozens of Raptors.

Still, SpaceX could have theoretically put Booster 4 through a partial cryoproof and maybe fired up as many as nine Raptors at once – not a replacement for full proof testing but still plenty to ensure Super Heavy’s structural integrity and gather invaluable data on clustered Raptor performance. Instead, of course, Super Heavy B4 has sat at Starbase’s former landing zone for more than three months while teams removed engines, reinstalled engines, half-installed a full Raptor heat shield; and installed two of six or seven ‘aerocovers’ needed to protect heat exchangers, racks of pressure vessels, and hydraulic systems installed on the booster’s aft.

spacex rolls super heavy booster to orbital launch mount

Booster 4’s half-finished aft as of December 11th. (NASASpaceflight – bocachicagal)

spacex rolls super heavy booster to orbital launch mount

B4 rolls towards the launch mount on December 12th. (NASASpaceflight – bocachicagal)

This is all to say that from the outside looking in, Booster 4’s path towards testing and flight has been almost entirely different from that of any other Starship prototype. While still quick in comparison with other launch vehicle development programs, relative to other Starship and Super Heavy prototypes, the rate of B4 progress has been far slower – strongly implying that something is seriously wrong with the booster, that SpaceX no longer feels that partial testing is worth the effort, that finishing Booster 4 just hasn’t been a priority for several months, or some combination of the above.

What that ultimately means is that it’s almost impossible to predict what Super Heavy B4’s future holds beyond the clear evidence that SpaceX will soon reinstall to reinstall it on an orbital launch mount that’s much closer to completion than it was the last time B4 was installed. At this point, it’s just as likely that the booster’s third launch mount installation will just be another mechanical fit test, though the hope is that it will kick off full-scale pneumatic and cryogenic proof testing. It could even culminate in the static fire of some or all of its 29 Raptor engines, which have been installed for several months.

TECH NEWS RELATED

Sainz takes on new chassis after fuel system issue

Carlos Sainz Jr (ESP) Ferrari F1-75. Spanish Grand Prix, Friday 20th May 2022. Barcelona, Spain. Ferrari has changed Carlos Sainz’s chassis for the remainder of the Spanish Grand Prix weekend after detecting a fuel system issue. Sainz was fourth overall on home soil at the Circuit de Barcelona-Catalunya on ...

View more: Sainz takes on new chassis after fuel system issue

Red Bull: Aston Martin investigation is ‘about the precedent’ F1 sets

The investigation into Aston Martin’s heavily upgraded car in Barcelona is about the precedent that the sport will set going forward, according to Red Bull’s Team Principal Christian Horner. Aston Martin turned heads in Spain this weekend when it unveiled a car that resembled Red Bull’s. Formula 1’s regulations ...

View more: Red Bull: Aston Martin investigation is ‘about the precedent’ F1 sets

How Much Can You Save Through Sam’s Club Auto Buying Program?

Cars are getting more and more expensive, which has most shoppers trying to figure out where to get the best deals. Some are turning to places like Sam’s Club, which can help with lower prices not only on gas but also on vehicles. But how does the Sam’s Club Auto Buying ...

View more: How Much Can You Save Through Sam’s Club Auto Buying Program?

1972 Opel GT Diesel

The Opel Diesel World Record GT was a test vehicle of the Adam Opel AG.An aerodynamically improved GT body, powered by a 2068 cc four-cylinder diesel engine with turbocharger and an output of 70 kW, achieved a top speed of 197 km/h during test drives in the Opel Dudenhofen test ...

View more: 1972 Opel GT Diesel

1974 Oldsmobile Cutlass Indy 500 Pace Car

Oldsmobile was no stranger when it came to pacing the Indianapolis 500. In 1974, Olds came back to Indy for the fourth time with the Hurst/Olds optioned Cutlass. The Hurst/Olds came with either a 350 cubic-inch V8 (first time available in the Cutlass, and mandatory for models bound for California) ...

View more: 1974 Oldsmobile Cutlass Indy 500 Pace Car

1957 Oldsmobile Super 88 Holiday Coupe

ldsmobile started the muscle car race when it introduced the Super 88 in the early 1950s. The Super 88 was equipped with a 4bbl carburetor and a lower rearend gear ratio for quicker acceloration. In 1956, the Super 88 added optional dual exhaust to help the engine breath better. In ...

View more: 1957 Oldsmobile Super 88 Holiday Coupe

Opel Mokka GS Line review: Designed to draw glances

Opel Mokka GS Line. If there is one thing that Opel has done right over the past decade, it would be design. The brand’s previous “Blade” design philosophy gave its models a distinct look. Both the Astra and Insignia, for instance, are handsome cars that have aged relatively well. Today, Opel’s ...

View more: Opel Mokka GS Line review: Designed to draw glances

Rumour: 4th-gen Hyundai Tucson could be launched by July 2022

The Tucson is likely to be offered with 2.0-litre turbo-petrol and diesel engines. Higher variants could get an all-wheel-drive option. The fourth-generation Hyundai Tucson has been testing in India for quite some time. While we still don’t have an official launch date, rumours suggest that the SUV might go ...

View more: Rumour: 4th-gen Hyundai Tucson could be launched by July 2022

Let The BMW M Boss Guide You Through The M4 CSL

Best racing games for enthusiasts

Canoo Production Starts Could Slip, But CEO Remains Confident In Funding

Cadillac Deville 1987

WATCH: Toyota Supra clear intercooler is as cool as it gets

BMW Munich Plant Marks Centenary, EVs To Account For 50% Of Production From 2023

Are Midsize Pickup Trucks Actually Cheaper Than Full-Size Pickup Trucks?

Hyundai Motor Group To Invest $5.5 Billion To Build EV, Battery Facilities In U.S

Volkswagen Supervisory Board Demands More Ambitious Software Roadmap - Report

Musk's $44 Billion Deal For Twitter Proceeding As Expected - Report

Rolls-Royce Boat Tail Looks Stunning on the Shores of Lake Como

Ford Figo 1.5 petrol AT: 50000 km up & other updates

OTHER TECH NEWS

Top Car News Car News