microsoft, windows, microsoft

Using a computer while hooked to numerous displays is a relatively frequent activity these days. Creating remote connections to such devices might be more difficult than expected. We have written this article about accessing two displays using a typical Windows RDC software called Remote Desktop Connection.

The solution we are about to show you will work just well for three, four, or even sixteen displays simultaneously. Connections are available not only between physical computers but also between virtual ones.

You can also control your computer in the office while at home by using dual monitors and the Remote Desktop function. Here is a step-by-step guide. Aye…Let’s go!

Contents show

1 ‘Use Dual Monitors Remote Desktop’ Benefits

2 How To Use Dual Monitors remote Desktop Simultaneously During an Rdp Setup

2.1 1. Viewing Dual Monitors Through Remote Desktop
2.2 2. Run Remote Desktop for several displays Through Windows Run
2.3 3. Changing the RDP file manually

3 Disadvantages While You use Dual Monitors Remote Desktop

4 Known connectivity problems

5 Features of the Span mode

6 Alternatives services for Remote Desktop

6.1 AnyDesk
6.2 Splashtop

7 Conclusion

8 FAQs

8.1 Can I Use 2 Monitors With Remote Desktop?
8.2 Can I Use Multiple Monitors With Remote Desktop Windows 10?
8.3 How Do I Switch Between Two Monitors In A Remote Session?
8.4 Why Won’t RDP Extend To The Second Monitor?
8.5 Can You Use Dual Monitors On A Remote Desktop?

‘Use Dual Monitors Remote Desktop’ Benefits

MSPs and IT experts would then be face-to-face with customers and clients without remote access software to debug, diagnose faults, or make changes to desktops and computers. 

Should work need to be done remotely, they would have had to walk consumers through the process and assume they were computer smart enough to grasp the job. 

Worse, there would be little insight into whether the issues had been rectified. Thank God for remote access technology.

How To Use Dual Monitors remote Desktop Simultaneously During an Rdp Setup

Before we begin, please remember that the regular Windows Remote Desktop software does not allow you to alter your connection parameters in the middle of a session. So, for any changes to take effect, you must terminate all active RDP connections.

Without further delay, here are the steps to enable multi-monitor capability for the Windows Remote Desktop program on your RDC server:

    Viewing Dual Monitors Through Remote DesktopRun Remote Desktop for several displays Through Windows RunChanging the RDP file manually

1. Viewing Dual Monitors Through Remote Desktop

microsoft, windows, microsoft
microsoft, windows, microsoft
microsoft, windows, microsoft

    Press Win and then open the app by typing ‘remote connection’ into the system search box.Enter your login information, then select the Show Options button in the bottom-right corner.Now, go to the Display tab and check the ‘Use all my displays for the remote session’ checkbox. 

See also  10 Fixes: Nexus Mod Manager Not Downloading

Note: DO NOT press the connect button yet; we have some more options to experiment with.

Return to the General page and click the Save as… option to avoid having to repeat all of these procedures each time you need to access this computer from a distant PC. It’s also a good idea to remember or write down the folder where you save the ROP file in case you need to make changes to it later.

2. Run Remote Desktop for several displays Through Windows Run

microsoft, windows, microsoft
microsoft, windows, microsoft

    A command can also be used to monitor several displays. The Run window will display if you press the Windows button + R on your keyboard. Enter the command line.”mstsc.exe/multimon” and input your credentials.

The box that indicates that all your displays are accessible for the RDP session will be immediately toggled on, but remember that this is just for a single session. 

Since the connection parameters are not automatically kept on the system, nor are your credentials for logging in, this is a preferable alternative for a one-time connection request.

3. Changing the RDP file manually

Open your RDP file (by default, it’s under system32) in Notepad or drag and drop it into the browser window, and add the following line to it:

Use Multimon:i:1

You may also put another line here to mask any or all of your monitors so that they are not accessible via TCP to any remote RDP servers:

selected monitors:s:x1,x2,x16

Adjust x1…16 with the exact numbers of your displays. The first number indicates the primary monitor.

Disadvantages While You use Dual Monitors Remote Desktop

It’s nice that Windows RDP is a free remote access tool, but like with any free product, it has certain limits.

One disadvantage of utilizing Windows RDP for remote access is that you cannot modify connection settings while the remote server session is open. This implies that for any changes to take effect, you must end all sessions and connections.

It can also be more difficult to connect computers with various operating systems or use different types of systems or machinery. For example, multi-monitor mode in Windows 7 is only accessible on Enterprise or Ultimate releases. Thus Windows 8 workstations will also require this build.

Windows RDP can have significant latency for some MSPs and IT professionals, which can get worse when trying to see numerous displays. 

See also  How To Capture Scrolling Screenshot In Windows And Mac

Freezing displays or a significant delay might not be worth the free price tag because time is money and customer happiness is essential. If so, remote access software offers many more powerful and feature-rich alternatives for remote access to many monitors.

Here’s what you can do to attempt to solve the problem:

    The first step is to disable UDP for the client. Launch Regedit and navigate to;

ComputerHKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindows NTTerminal ServicesClient

      2. Here, you must construct a DWORD named fClientDisableUDP and provide a value of 1.

      3. Next, go to the Remote Desktop settings and turn off the smart card passthrough.

Some so-called experts suggest deactivating your VPNs, but we highly advise against it. 

If these two methods do not work for you, simply abandon conventional programs and invest in a real software package to fully utilize RDP technology.

Known connectivity problems

As previously stated, you will have no trouble accessing non-Windows multi-monitor desktops. However, connecting PCs with various Windows versions is more difficult, especially when connecting to older systems from a newer one.

Multi-monitor mode is only available for Windows 7 Enterprise and Ultimate editions. If you’re connecting to a Windows 8.1 PC, make sure it’s a Professional or Enterprise edition. 

In terms of Windows Server builds, both Standard and Datacenter editions of Windows 2008, 2012, and 2016 may be linked to other Windows versions in multi-monitor mode.

Features of the Span mode

A PC with numerous displays may be connected using Remote Desktop in addition to the features we’ve already covered. 

Although it was included in Windows Vista as an alternative to multi-monitor mode, this feature was never very well-liked. Our best guess is that its limitations are why no one loved it. However, it merits a mention in this context.

Simply told, this mode tries to cram all of the remote monitors into one window rather than showing you each one separately. And nine times out of ten, they fail horribly because not all monitor configurations fit inside a rectangle.

As you can see, this mode is useless unless all of your displays have the same vertical resolution. But if that’s the case, here’s what you need to do to get it started:

Open the Run command box by pressing Win+R on your keyboard and type mstsc/span

Alternatives services for Remote Desktop

As previously said, if Remote Desktop does not meet your needs, there are third-party software solutions that can quickly and simply enable you to profit from remote access with multiple displays. Atera connects with AnyDesk and Splashtop, so here’s how it works with both.

See also  16 Fixes: Unable To Login With Microsoft Account In Windows 10

AnyDesk

The toolbar on AnyDesk will show you each remote monitor, each numbered with its rectangle. You will be sent to the appropriate display on the device to which you are connected by clicking on the suitable rectangle. 

You may even show many monitors at once by launching a parallel session with the same device from various windows. You can find the monitor you’re looking for by switching between the windows.

Splashtop

Multiple monitors may be seen simultaneously with Splashtop, and countless customization possibilities exist! 

microsoft, windows, microsoft

Choose between the multi-to-multi monitor view, which lets you view multiple screens from your workstation, the all-monitor view, which lets you view as many screens as you need from a single screen, and the single monitor view which lets you switch between the screens you need for greater visibility.

Conclusion

And that’s all for today’s digest on dual monitors on a remote desktop. Remote work is no longer a niche use case in today’s corporate environment; it is the norm. Remote access is a potent weapon in your technological toolbelt for supporting customers that telecommute, hybrid workspaces, multi-site clientele, and even users on business travels.

FAQs

Can I Use 2 Monitors With Remote Desktop?

With Windows 7 or later, you can use multiple monitors.

Can I Use Multiple Monitors With Remote Desktop Windows 10?

Ensure the box labeled “Use all my displays for the remote session” is selected in the Display tab. For MSPs, returning to the General page and selecting “Store as” will allow you to save these RDP settings as a template.

How Do I Switch Between Two Monitors In A Remote Session?

During a remote session with ActiveX Viewer, follow the instructions below to switch between several monitors:1. Select Computers under Tools -> Remote Control.2. Select ActiveX viewer from the Viewer section.3. Click Connect next to the computer you wish to connect to in the Action column.
4. Then, choose View Desktop.

Why Won’t RDP Extend To The Second Monitor?

Click the “Options” button in the bottom left-hand corner of the Remote Desktop window after opening it. Using all my displays for the remote session is a checkbox that may be selected by clicking the “Display” tab. After selecting this, click “Connect” to continue connecting to the server as usual.

Can You Use Dual Monitors On A Remote Desktop?

Head over to the Windows search bar.1. Open it by typing Remote Desktop Connection.2. Click Display and make sure. Utilize every display I have for the remote session.
3. After clicking Connect, establish a connection to the server.

TECH NEWS RELATED

Roblox Minion Simulator codes (September 2022)

Image Via Gamepur Roblox Minion Simulator is one of the best mining games you can play on Roblox. In the game, you get the option to choose one of three minions to help you mine. After getting your minion, you need to mine the ores and get the gems ...

View more: Roblox Minion Simulator codes (September 2022)

 9 Ways to Fix Black Screen With Cursor on Windows 

The black screen with a cursor appears mainly when Windows explorer fails to startup correctly. Fortunately, when this happens, users can still access some Windows Features, which makes fixing it easier.  The error is generally seen in Windows devices after installing the system updates. Additionally, it can also appear ...

View more:  9 Ways to Fix Black Screen With Cursor on Windows 

Roblox Lifting Heroes codes (September 2022)

Image Via Roblox Roblox Lifting Heroes is one of the newer addition to the trending clicker simulation games. It combines clicking and body-building mechanics, making this game one of the fan favorites. In the game, you need to lift weights and do different exercises to get stronger. As you ...

View more: Roblox Lifting Heroes codes (September 2022)

3 Ways to Run Windows Update from Command Line

It’s always recommended to regularly update Windows as the updates solve any existing bugs and bring about new features. Usually, users use the graphical interface on the OS to search for and install updates. However, there are some cases where you may want to run this process from the ...

View more: 3 Ways to Run Windows Update from Command Line

Guild Esports has signed its largest sponsorship yet with Sky

The three-year deal will see Sky becoming the premier partner of the esports organisation.

View more: Guild Esports has signed its largest sponsorship yet with Sky

Bosses scared that employees slack off while WFH: Satya Nadella

ETtech In a recent report on shifting workplace attitudes, the Microsoft CEO commented that some bosses are skeptical of work-from-home culture, reports Windows Central. Amid the rise of work-from-home culture post-Covid-19 lockdowns, Microsoft CEO Satya Nadella said that bosses are scared that their employees slack off while working from home.In ...

View more: Bosses scared that employees slack off while WFH: Satya Nadella

For Honor Stuttering, Freezing, Crashing and FPS Drops on PC

Are you experiencing stuttering, disconnecting, crashing, freezing, or FPS drops in For Honor on your Windows PC? For Honor is a popular action video game developed by Ubisoft. It is played by millions of users. However, many gamers have complained about getting performance issues while playing the For Honor game on ...

View more: For Honor Stuttering, Freezing, Crashing and FPS Drops on PC

Windows 11 White Blank Block or Square Box on Desktop Screen

There is a known bug in Windows 11 where you might sometimes see a white blank block (rectangle or square box) that blocks the screen partially or fully, and as a result, you can’t click anything on the desktop screen where the white box resides. This can be a terrible ...

View more: Windows 11 White Blank Block or Square Box on Desktop Screen

How to Install Mods on Xbox One

Fix: A Device Which Does Not Exist Was Specified

Measuring Impedance Virtually

iRobot’s new 2-in-1 robot will mop and vacuum your home simultaneously

Which cloud is for you?

Every Paper Mario game, ranked from worst to best

Microsoft Flight Simulator Tiger Moth & Grenoble Airport Released; Girona-Costa Brava Gets New Screenshots & Lynchburg Announced

Whatsapp Call Links Are Here to Replace Regular Conference Calls: A Feature That Rivals Google Meet, Microsoft Teams

Microsoft PowerPoint Users Beware: Hackers Are Using it to Spread Malware

What does smurfing mean in video games? Name origin and reason

The 21 highest sale price items in Disney Dreamlight Valley – Best items to sell

Robotic Platform Is Open Sourced And User Friendly

OTHER TECH NEWS

Top Car News Car News